Printed placeholder cards and scissors next to an open binder

One Piece Card Game

Uso-Hachi binder placeholders

One placeholder for each of the 8 cards in the Uso-Hachi master set, in binder order. Each is standard card size (63 × 88 mm), so it drops into a pocket and tells you which card belongs there.

Open the checklist

  1. Print at 100% scale, not “fit to page”, on Letter or A4. Card stock holds up better than paper.
  2. Cut along the dashed lines. There are nine placeholders on each sheet.
  3. Slot them in order. The small page on each one shows which pocket it goes in.
OP05binderlore.comUso-HachiPage 1, pocket 1OP05-061Uncommon#1
OP05binderlore.comUso-HachiPage 1, pocket 2OP05-061Uncommon#2
ST-18binderlore.comUso-HachiPage 1, pocket 3ST18-001Common#3
ST-18binderlore.comUso-HachiPage 1, pocket 4OP05-061Uncommon#4
OP10binderlore.comUso-HachiSPPage 1, pocket 5ST18-001Common#5
PRB-02binderlore.comUso-HachiAlternate ArtPage 1, pocket 6ST18-001Common#6
PRB-02binderlore.comUso-HachiPirate FoilPage 1, pocket 7ST18-001Common#7
PRB-02binderlore.comUso-HachiReprintPage 1, pocket 8ST18-001Common#8

See it on TCGplayer (opens in a new tab)